Schlage Door Lock
The following is not the exact model. The one I purchased is a FE599 CAM 505 ACC
http://youtu.be/ZN5GF7dnP_M
How to program it:
http://youtu.be/z8BgHP712eg
To add a new code:
Enter the 6 digit programming code
Wait for Schlage Key to turn orange
Press Schlage Key followed immediately by a 1.
Wait for 3 beeps
Enter new 4 digit code
Pause
Wait for 3 beeps
Enter 4 digit code again.
Wait for Schlage key to turn green and give you a long beep.
To remove a new code:
Enter the 6 digit programming code
Wait for Schlage Key to turn orange
Press Schlage Key followed immediately by a 2.
Wait for 3 beeps
Enter new 4 digit code
Pause
Wait for 3 beeps
Enter 4 digit code again.
Wait for Schlage key to turn green and give you a long beep.
To change the programming code:
Enter the 6 digit programming code
Wait for Schlage Key to turn orange
Press Schlage Key followed immediately by a 3.
Wait for 3 beeps
Enter new 6 digit programming code
Pause
Wait for 3 beeps
Enter new 6 digit programming code again.
Wait for Schlage key to turn green and give you a long beep.
To suspend the functioning of all codes:
Enter the 6 digit programming code
Wait for Schlage Key to turn orange
Press Schlage Key followed immediately by a 4.
Wait for 3 beeps
Enter new 4 digit code
Pause
Wait for 3 beeps
Enter 4 digit code again.
Wait for Schlage key to turn green and give you a long beep.
To Reactivate the Functioning of all codes:
Enter the 6 digit programming code
Wait for Schlage Key to turn green
To Enroll the Schlage lock into a Bridge:
Enter the 6 digit programming code
Wait for Schlage Key to turn orange
Press Schlage Key followed immediately by a 0.
Press the + button on the Bridge.
You may find the above instructions at:
http://link.schlage.com/Part2Schlage/Part2SchlageDocuments/DOCS/Lock_User_Guide_B.p
df
Which is a subset of the following general starting point:
www.part2.schlage.com
If you disconnect the battery and push the Schlage button, it will reset the lock to the original
codes which are listed on the back of the outside portion of the lock. For the lake home, the
codes are as follows:
373838
1936
8074
Naturally, I have changed all of those codes.
Next
The following is not the exact model. The one I purchased is a FE599 CAM 505 ACC
http://youtu.be/ZN5GF7dnP_M
How to program it:
http://youtu.be/z8BgHP712eg
To add a new code:
Enter the 6 digit programming code
Wait for Schlage Key to turn orange
Press Schlage Key followed immediately by a 1.
Wait for 3 beeps
Enter new 4 digit code
Pause
Wait for 3 beeps
Enter 4 digit code again.
Wait for Schlage key to turn green and give you a long beep.
To remove a new code:
Enter the 6 digit programming code
Wait for Schlage Key to turn orange
Press Schlage Key followed immediately by a 2.
Wait for 3 beeps
Enter new 4 digit code
Pause
Wait for 3 beeps
Enter 4 digit code again.
Wait for Schlage key to turn green and give you a long beep.
To change the programming code:
Enter the 6 digit programming code
Wait for Schlage Key to turn orange
Press Schlage Key followed immediately by a 3.
Wait for 3 beeps
Enter new 6 digit programming code
Pause
Wait for 3 beeps
Enter new 6 digit programming code again.
Wait for Schlage key to turn green and give you a long beep.
To suspend the functioning of all codes:
Enter the 6 digit programming code
Wait for Schlage Key to turn orange
Press Schlage Key followed immediately by a 4.
Wait for 3 beeps
Enter new 4 digit code
Pause
Wait for 3 beeps
Enter 4 digit code again.
Wait for Schlage key to turn green and give you a long beep.
To Reactivate the Functioning of all codes:
Enter the 6 digit programming code
Wait for Schlage Key to turn green
To Enroll the Schlage lock into a Bridge:
Enter the 6 digit programming code
Wait for Schlage Key to turn orange
Press Schlage Key followed immediately by a 0.
Press the + button on the Bridge.
You may find the above instructions at:
http://link.schlage.com/Part2Schlage/Part2SchlageDocuments/DOCS/Lock_User_Guide_B.p
df
Which is a subset of the following general starting point:
www.part2.schlage.com
If you disconnect the battery and push the Schlage button, it will reset the lock to the original
codes which are listed on the back of the outside portion of the lock. For the lake home, the
codes are as follows:
373838
1936
8074
Naturally, I have changed all of those codes.
Next
 | |  | |  | |  |